Displaying And Maintaining Ipv6 Mce - HP FlexNetwork 10500 Series Configuration Manual

Step
2. Enter BGP instance view.
3. Enter BGP-VPN instance
view.
4. Configure the PE as an
EBGP peer.
5. Enter BGP-VPN IPv6 unicast
address family view.
6. Enable BGP to exchange
IPv6 unicast routes with the
specified peer.
7. Redistribute VPN routes.
Configuring IBGP between an MCE and a PE
Step
1. Enter system view.
2. Enter BGP instance
view.
3. Enter BGP-VPN
instance view.
4. Configure the PE as an
IBGP peer.
5. Enter BGP-VPN IPv6
unicast address family
view.
6. Enable BGP to
exchange IPv6 unicast
routes with the peer.
7. Redistribute the VPN
routes of the VPN site.

Displaying and maintaining IPv6 MCE

Execute display commands in any view.
Task
Display VPN instance information.
For commands that display routing tables for VPN instances, see Layer 3—IP Routing Command
Reference.
Command
bgp as-number [ instance
instance-name ]
[ multi-session-thread ]
ip vpn-instance
vpn-instance-name
peer { group-name | ipv6-address
[ prefix-length ] } as-number
as-number
address-family ipv6 [ unicast ]
peer { group-name | ipv6-address
[ prefix-length ] } enable
import-route protocol
[ { process-id | all-processes }
[ allow-direct | med med-value |
route-policy route-policy-name ]
* ]
Command
system-view
bgp as-number [ instance instance-name ]
[ multi-session-thread ]
ip vpn-instance vpn-instance-name
peer { group-name | ipv6-address
[ prefix-length ] } as-number as-number
address-family ipv6 [ unicast ]
peer { group-name | ipv6-address
[ prefix-length ] } enable
import-route protocol [ { process-id |
all-processes } [ allow-direct | med
med-value | route-policy
route-policy-name ] * ]
Command
display ip vpn-instance [ instance-name vpn-instance-name ]
454
Remarks
N/A
N/A
By default, no BGP peers exist.
N/A
By default, BGP does not
exchange IPv6 unicast routes with
any peer.
By default, no routes are
redistributed into BGP.
Remarks
N/A
By default, BGP is not
enabled.
N/A
By default, no BGP peers or
peer groups exist.
N/A
By default, BGP does not
exchange IPv6 unicast routes
with any peer.
By default, no routes are
redistributed into BGP.