Crlsp Backup Configuration Example - HP FlexNetwork 10500 Series Configuration Manual

Destination
FEC
Protocol
LSR Type
Service
In-Label
State
Nexthop
Out-Interface: -
Destination
FEC
Protocol
LSR Type
Service
NHLFE ID
State
Out-Label
Nexthop
Out-Interface: Vlan1
Destination
FEC
Protocol
LSR Type
Service
NHLFE ID
State
Nexthop
Out-Interface: Vlan1
Destination
FEC
Protocol
LSR Type
Service
NHLFE ID
State
Out-Interface: NHLFE74

CRLSP backup configuration example

Network requirements
Switch A, Switch B, Switch C, and Switch D run IS-IS and IS-IS TE.
Use RSVP-TE to establish an MPLS TE tunnel from Switch A to Switch C to transmit data between
the two IP networks. Enable CRLSP hot backup for the tunnel to simultaneously establish a primary
CRLSP and a backup CRLSP. When the primary CRLSP fails, traffic is switched to the backup
CRLSP.
: 4.4.4.9
: 1.1.1.9/1/30478
: RSVP
: Egress
: -
: 3
: Active
: 127.0.0.1
: 4.4.4.9
: 1.1.1.9/1/30478
: RSVP
: Ingress
: -
: 1025
: Active
: 1150
: 30.1.1.1
: 30.1.1.1
: 30.1.1.1
: Local
: Ingress
: -
: 1024
: Active
: 30.1.1.1
: 4.4.4.9
: Tunnel1
: Local
: Ingress
: -
: 268435457
: Active
132