HP FlexNetwork 10500 Series Configuration Manual page 391

Step
4. Create the BGP L2VPN
address family and enter
BGP L2VPN address family
view.
5. Enable BGP to exchange
VPLS PE information with
the specified peer or peer
group.
6. Enable BGP to exchange
VPLS PE information with
the specified peer or peer
group.
7. (Optional.) Permit the local
AS number to appear in
routes from the specified
peer or peer group and
specify the appearance
times.
8. (Optional.) Enable route
target-based filtering of
incoming BGP L2VPN
information.
9. (Optional.) Configure the
router as an RR and specify
a peer or peer group as its
client.
10. (Optional.) Enable L2VPN
information reflection
between clients.
11. (Optional.) Configure the
cluster ID of the RR.
12. (Optional.) Configure the
filtering of reflected L2VPN
information.
13. (Optional.) Return to user
view.
14. (Optional.) Soft-reset L2VPN
BGP sessions.
15. (Optional.) Reset L2VPN
BGP sessions.
For more information about the peer as-number, peer enable, peer allow-as-loop, peer
reflect-client, reflect between-clients, reflector cluster-id, refresh bgp l2vpn, and reset bgp
l2vpn commands, see Layer 3—IP Routing Command Reference.
Command
address-family l2vpn
peer { group-name | ip-address
[ mask-length ] } enable
peer { group-name | ip-address
[ mask-length ] } auto-discovery
[ non-standard ]
peer { group-name | ip-address
[ mask-length ] } allow-as-loop
[ number ]
policy vpn-target
peer { group-name | ip-address
[ mask-length ] } reflect-client
reflect between-clients
reflector cluster-id { cluster-id |
ip-address }
rr-filter ext-comm-list-number
return
refresh bgp [ instance
instance-name ] { ip-address
[ mask-length ] | all | external |
group group-name | internal }
{ export | import } l2vpn
reset bgp [ instance
instance-name ] { as-number |
ip-address [ mask-length ] | all |
external | group group-name |
internal } l2vpn
382
Remarks
By default, no BGP L2VPN
address family exists.
By default, BGP cannot exchange
VPLS PE information with a peer
or peer group.
By default, BGP can exchange
VPLS PE information with a BGP
L2VPN peer or peer group by
using RFC 6074
MP_REACH_NLRI.
By default, the local AS number is
not allowed in routes from a peer
or peer group.
By default, route target-based
filtering of incoming BGP L2VPN
information is enabled.
By default, no RR or client is
configured.
By default, L2VPN information
reflection is enabled between
clients.
By default, an RR uses its own
router ID as the cluster ID.
By default, the RR does not filter
reflected L2VPN information.
N/A
N/A
N/A