HP FlexNetwork 10500 Series Configuration Manual page 156

LSP ID
Admin State
Ingress LSR ID
Signaling
Resv Style
Tunnel mode
Reverse-LSP name
Reverse-LSP LSR ID
Class Type
Reserved Bandwidth
Setup Priority
Affinity Attr/Mask
Explicit Path
Backup Explicit Path : -
Metric Type
Record Route
FRR Flag
Backup Bandwidth Flag: Disabled
Backup Bandwidth
Bypass Tunnel
Route Pinning
Retry Limit
Reoptimization
Backup Type
Auto Bandwidth
Min Bandwidth
Collected Bandwidth
# Verify that the current bypass tunnel that protects the primary CRLSP is tunnel 50.
[SwitchB] display mpls lsp
FEC
2.2.2.2/51/16802
2.2.2.2/1/16802
Backup
2.2.2.2/50/16802
3.2.1.2
3.3.1.2
# Display detailed information about MPLS TE Tunnel1 (the tunnel for the primary CRLSP) on Switch
A. The output shows that Tunnel1 is protected by the bypass tunnel Tunnel50, and the protected
node is 3.1.1.1.
[SwitchA] display rsvp lsp tunnel-id 1 verbose
Tunnel name: Tunnel1
Destination: 4.4.4.4
Tunnel ID: 1
LSR type: Ingress
Setup priority: 7
In-Label: -
In-Interface: -
Nexthop: 2.1.1.2
: 16802 Tunnel ID
: Normal
: 2.2.2.2 Egress LSR ID
: RSVP-TE Static CRLSP Name
: SE
: -
: -
: - Reverse-LSP Tunnel ID: -
: CT0 Tunnel Bandwidth
: 0 kbps
: 7 Holding Priority
: 0/0
: -
: TE
: Enabled Record Label
: Disabled Bandwidth Protection : Disabled
Backup Bandwidth Type: -
: -
: Yes Auto Created
: Disabled
: 3 Retry Interval
: Disabled Reoptimization Freq
: None Backup LSP ID
: Disabled Auto Bandwidth Freq
: - Max Bandwidth
: -
Proto In/Out Label
RSVP -/3
RSVP -/1151
-/3
RSVP -/3
Local -/-
Local -/-
147
Interface/Out NHLFE
Vlan4
Vlan2
Tun50
Vlan6
Vlan6
Vlan6
Source: 1.1.1.1
LSP ID: 16802
Direction: Unidirectional
Holding priority: 7
Out-Label: 1150
Out-Interface: Vlan1
Exclude-any: 0
: 51
: 3.3.3.3
: -
: 0 kbps
: 7
: Disabled
: Yes
: 2 sec
: -
: -
: -
: -