Signals; Settings; Technical Data; Settable Timer Function Block Timerset - ABB RED650 Technical Manual

Section 14
Logic
14.7.8.2
14.7.8.3
Table 301: SRMEMORY Group settings (basic)
Name
Memory
14.7.8.4
14.7.9
468

Signals

Table 299: SRMEMORY Input signals
Name
SET
RESET
Table 300: SRMEMORY Output signals
Name
OUT
NOUT

Settings

Values (Range) Unit
Off -
On

Technical data

Table 302: Number of SRMEMORY instances
Logic block
SRMEMORY

Settable timer function block TIMERSET

The Settable timer function block (TIMERSET) timer has two outputs for the delay
of the input signal at drop-out and at pick-up. The timer has a settable time delay. It
also has an Operation setting On and Off that controls the operation of the timer.
Type Default Description
BOOLEAN 0 Input signal to set
BOOLEAN 0 Input signal to reset
Type Description
BOOLEAN Output signal
BOOLEAN Inverted output signal
Step Default
- On
Quantity with cycle time
3 ms 8 ms
10 10
1MRK 505 394-UEN A
PID-3813-INPUTSIGNALS v5
PID-3813-OUTPUTSIGNALS v5
Description
Operating mode of the memory function
GUID-7A0F4327-CA83-4FB0-AB28-7C5F17AE6354 v1
100 ms
20
Line differential protection RED650 2.2 IEC
Technical manual
PID-3813-SETTINGS v5
IP11022-1 v2
M11494-3 v3