Mounting Procedure For Flush Mounting; 19" Panel Rack Mounting; Overview - ABB RED650 Technical Manual

Section 22
IED hardware
22.4.1.2
22.4.2
22.4.2.1
852
To obtain IP54 class protection, an additional factory mounted
sealing must be ordered when ordering the IED.

Mounting procedure for flush mounting

4
6
IEC16000080 V1 EN-US
Figure 399: Flush mounting details.
PosNo Description
1 Sealing strip, used to obtain
IP54 class. The sealing strip is
factory mounted between the
case and front plate.
2 Fastener
3 Groove
4 Screw
5 Joining point of sealing strip
6 Panel

19" panel rack mounting

Overview

The IED can be mounted in a standard 19" cubicle rack by using a mounting kit
consisting of two mounting angles and their fastening screws.
3
2
IEC16000080=1=en.vsd
Quantity
-
2
-
4
-
-
1MRK 505 394-UEN A
1
5
Type
-
-
-
M3x8 mm
-
-
Line differential protection RED650 2.2 IEC
Technical manual
M11942-2 v5
IP10313-1 v1
SEMOD127656-5 v4