Event Function Event; Identification; Functionality - ABB RED650 Technical Manual

1MRK 505 394-UEN A
15.5
15.5.1
15.5.2
Line differential protection RED650 2.2 IEC
Technical manual
Function
Independent time delay for gas
pressure alarm
Independent time delay for gas
pressure lockout
CB Contact Travel Time,
opening and closing
Remaining Life of CB
Accumulated Energy

Event function EVENT

Identification

Function description
Event function

Functionality

When using a Substation Automation system with LON or SPA communication,
time-tagged events can be sent at change or cyclically from the IED to the station
level. These events are created from any available signal in the IED that is
connected to the Event function (EVENT). The EVENT function block is used for
LON and SPA communication.
Analog, integer and double indication values are also transferred through the
EVENT function.
Range or value
(0.00 – 60.00) s
(0.00 – 60.00) s
IEC 61850 IEC 60617
identification identification
EVENT
Section 15
Monitoring
Accuracy
±0.2% or ±30 ms whichever is
greater
±0.2% or ±30 ms whichever is
greater
±3 ms
±2 operations
±1.0% or ±0.5 whichever is
greater
SEMOD120002-1 v2
SEMOD167950-2 v2
ANSI/IEEE C37.2
device number
-
S00946 V1 EN-US
M12805-6 v11
553