Security Events On Protocols Secalarm; Security Alarm Secalarm; Signals; Settings - ABB RED650 Technical Manual

1MRK 505 394-UEN A
18.10
18.10.1
18.10.1.1
18.10.1.2
Table 551: SECALARM Non group settings (basic)
Name Values (Range)
Operation
18.11
18.11.1
Line differential protection RED650 2.2 IEC
Technical manual
function, which sets the output connector "VALID" to 0 (zero) if its block does not
receive any data within the time defined by tMaxCycleTime.
LON connections are established using LON network tool (LNT).

Security events on protocols SECALARM

Security alarm SECALARM

Signals

Table 550: SECALARM Output signals
Name
EVENTID
SEQNUMBER

Settings

Unit
Off -
On

Activity logging parameters ACTIVLOG

Activity logging ACTIVLOG

ACTIVLOG contains all settings for activity logging.
There can be 6 external log servers to send syslog events to. Each server can be
configured with IP address; IP port number and protocol format. The format can be
either syslog (RFC 5424) or Common Event Format (CEF) from ArcSight.
Type Description
INTEGER EventId of the generated security event
INTEGER Sequence number of the generated security
event
Step Default
- On
Section 18
Station communication
GUID-205B0024-DA06-4369-8707-5E1D2D035995 v2
PID-3430-OUTPUTSIGNALS v6
Description
Operation On/Off
GUID-BED7C3D6-6BE3-4DAC-84B3-92239E819CC0 v1
PID-3430-SETTINGS v6
743