Signals; Technical Data; Controllable Gate Function Block Gate; Function Block - ABB RED650 Technical Manual

1MRK 505 394-UEN A
14.7.1.2
14.7.1.3
14.7.2
14.7.2.1
14.7.2.2
Line differential protection RED650 2.2 IEC
Technical manual

Signals

Table 273: AND Input signals
Name Type
INPUT1 BOOLEAN
INPUT2 BOOLEAN
INPUT3 BOOLEAN
INPUT4 BOOLEAN
Table 274: AND Output signals
Name Type
OUT BOOLEAN
NOUT BOOLEAN

Technical data

Table 275: Number of AND instances
Logic block
3 ms
AND 60

Controllable gate function block GATE

The Controllable gate function block (GATE) is used for controlling if a signal
should be able to pass from the input to the output or not depending on a setting.

Function block

GATE
INPUT OUT
IEC04000410-2-en.vsd
IEC04000410 V2 EN-US
Figure 231: GATE function block
Signals
Table 276: GATE Input signals
Name Type
INPUT BOOLEAN
Default Description
1 Input signal 1
1 Input signal 2
1 Input signal 3
1 Input signal 4
Description
Output signal
Inverted output signal
Quantity with cycle time
8 ms
60
Default Description
0 Input to gate
Section 14
Logic
PID-3437-INPUTSIGNALS v7
PID-3437-OUTPUTSIGNALS v7
GUID-D1179280-1D99-4A66-91AC-B7343DBA9F23 v2
100 ms
160
IP11021-1 v2
M11489-3 v2
M11490-3 v2
PID-3801-INPUTSIGNALS v6
461