Omron NY532-5400 Reference Manual page 49

Type Instruction
Serial Commu- NX_SerialSend
nications
Instructions
NX_SerialRcv
NX_ModbusRtuCmd
NX_ModbusRtuRead
NX_ModbusRtuWrite
NX_SerialSigCtl
NX_SerialBufClear
NX_SerialStartMon
NX_SerialStopMon
NY-series Instructions Reference Manual (W560)
Name
Send No-protocol Sends data in No-protocol Mode from a serial
Data port on an NX-series Communications Inter-
face Unit or Option Board.
Receive No- Reads data in No-protocol Mode from a serial
protocol Data port on an NX-series Communications Inter-
face Unit or Option Board.
Send Modbus RTU Sends general commands from a serial port on
General Command an NX-series Communications Interface Unit
or Option Board to Modbus-RTU slaves using
Modbus-RTU protocol.
Send Modbus RTU Sends read commands from a serial port on an
Read Command NX-series Communications Interface Unit or
Option Board to Modbus-RTU slaves using
Modbus-RTU protocol.
Send Modbus RTU Sends write commands from a serial port on
Write Command an NX-series Communications Interface Unit
or Option Board to Modbus-RTU slaves using
Modbus-RTU protocol.
Serial Control Turns ON or OFF the ER or RS signal of a
Signal ON/OFF serial port on an NX-series Communications
Switching Interface Unit or Option Board.
Clear Buffer Clears the send or receive buffer.
Start Serial Line Starts serial line monitoring of an NX-series
Monitoring Communications Interface Unit.
Stop Serial Line Stops serial line monitoring of an NX-series
Monitoring Communications Interface Unit.
1 Instruction Set
Function Page
2-1156
2-1169
1
2-1183
2-1193
2-1204
2-1215
2-1224
2-1234
2-1239
1-19