Zonecmp - Omron NY532-5400 Reference Manual

ZoneCmp

The ZoneCmp instruction determines if the comparison data is within the specified maximum and mini-
mum values.
Instruction
ZoneCmp Zone Comparison
Variables
Name Meaning
MN Minimum value
In Comparison
data
MX Maximum value
Out Comparison
result
* If you omit an input parameter, the default value is not applied. A building error will occur.
Bit strings
MN
In
MX
Out OK
* You can specify TIME, DATE, TOD, and DT data with CPU Units with unit version 1.01 or later and Sysmac Studio version
1.02 or higher.
NY-series Instructions Reference Manual (W560)
Name FB/FUN
FUN
I/O Description
Minimum value
Value to compare
Input
Maximum value
Output Comparison result
OK OK OK OK OK OK OK OK OK OK OK OK OK OK
OK OK OK OK OK OK OK OK OK OK OK OK OK OK
OK OK OK OK OK OK OK OK OK OK OK OK OK OK
Graphic expression
(@)ZoneCmp
EN Out
MN
In
MX
Valid range
Depends on data type.
Depends on data type.
Integers
2 Instruction Descriptions
ST expression
Out:=ZoneCmp(MN, In,
MX);
Unit Default
0
*
---
0
--- ---
Times, durations,
dates, and text strings
*
*
*
2
2-109