Speed - Dürkopp Adler 650-10 Service Instructions Manual

Service settings via software (OP3000)
Fig. 50: Thread Trim
Parameters in the submenu Thread Trim

4.4.4 Speed

In the submenu Speed, you can define the speed in certain situations.
Fig. 51: Speed
Parameters in the submenu Speed
Service Instructions 650-10 - 01.0 - 08/2016
Icon Entry Meaning
Speed Speed when cutting the
thread
Thr. Tens. Thread tension during
thread cutting: The larger
the value, the shorter the
thread will be cut
Turn Back Automatic reversal after cut-
ting the thread
Icon Entry Meaning
Max. Speed Maximum speed when fully
stepping on the pedal in min
Min. Speed
Minimum speed in min
Pos. Speed Speed when positioning
in min
Soft Speed
Speed on soft start in min
N Stitches Number of soft start stitches
180
n
-1
-1
-1
-1
10
1
Possible value
Preset value
range
50 – 250 180
1 – 99 10
0 = off 1
1 = on
Possible value
Preset value
range
500 – 4000 4000
50 – 400 150
10 – 700 400
10 – 1000 500
1 – 10 1
63