Activating Sewing Foot Lift After Sewing Stop; Activating Soft Start; Reducing Speed - Dürkopp Adler 1767 Operating Instructions Manual

62

5.2.10 Activating sewing foot lift after sewing stop

The sewing foot lift after sewing stop lifts the sewing foot after a
sewing stop.
To activate the sewing foot lift:
1. Press.
 The LED illuminates.

5.2.11 Activating soft start

Soft start refers to starting the machine at a slower speed.
The function prevents the motor from overheating during long
work processes. After a certain stitch count, the machine runs at
the set speed.
To activate the soft start:
1. Press.
 The LED illuminates.

5.2.12 Reducing speed

The reduced speed protects the motor with an ongoing lower
speed. Reduced speed is set at the factory as the default.
To activate the reduced speed:
1. Press.
 The LED illuminates.
To adjust the speed:
1. Press.
Press the C+ button from the Programming button group.
2.
 The reduced speed increases by one-hundredth.
Operating Instructions 1767 - 00.0 - 12/2016
Programming