Update Machine Software - Dürkopp Adler 650-10 Service Instructions Manual

Service settings via software (OP7000)

5.11 Update machine software

Information
In machines with software version up to and including A.3.27 a bootloader
update must be performed. In machines with software version from A.3.29
the software update can be performed immediately.
1. Download the bootloader software from the Dürkopp Adler website
2. Unpack the file on a USB key.
 2 folders are created: bootscr and update.
3. Insert the USB key (2) in the USB port (3) at the control (1).
4. Switch on the machine.
 The update starts. The LEDs (4) light up.
The update is finished when only the POWER LED glows.
Fig. 80: Update machine software (1)
①
②
(1) - Control
(2) - USB key
This is how you perform the software update:
1. Download the update file from the Dürkopp Adler website. The file is
2. Copy the update file on a Dürkopp Adler USB key (part number
Service Instructions 650-10 - 01.0 - 08/2016
(https://software.duerkopp-adler.com/maschinenprogramme.html).
named 9899_65500_700_A03.61_2016-08-15.jcbi
9835 301003).
③ ②
(3) - USB-port
(4) - LEDs
④
97