Programming
19.2.11 Activating the soft start
Soft start refers to starting the machine at a slower speed. The function
prevents the motor from overheating during long work processes.
After a certain stitch count, the machine runs at the set speed.
To activate the soft start:
1. Press
The LED illuminates.
19.2.12Reducing speed
The reduced speed protects the motor with an ongoing lower speed.
Reduced speed is set at the factory as the default.
To activate the reduced speed:
1. Press
The LED illuminates.
To adjust the speed:
1. Press
2. Press the C+ button from the Programming button group.
The reduced speed increases by one-hundredth.
3. Press the D+ button.
The reduced speed increased by one-tenth.
You can also reduce the speed:
1. Press the C- button for one-hundredth and D- for one-tenth increments.
Service Instructions 1767 - 00.0 - 12/2016
.
.
.
101