Menu Item Service; Multitest - Dürkopp Adler 650-10 Service Instructions Manual

Service settings via software (OP3000)

4.6 Menu item Service

In the menu item Service, you can perform function tests, calibrate or re-
set the machine to its delivery state.
Fig. 55: Menu item Service
The submenus have further subitems ( p. 56).

4.6.1 Multitest

In the submenu Multitest, you can test whether certain elements are
functioning.
Fig. 56: Multitest
Test Output
In this machine, this submenu has no function.
Test PWM
In the submenu Test PWM, you can test the magnets for the thread cutter.
To test the magnets for the thread cutter:
1. Use
Fig. 57: Test PWM
Service Instructions 650-10 - 01.0 - 08/2016
+
–
WARNING
Risk of injury from moving parts, cutting and
sharp parts!
Crushing, cutting and puncturing are possible.
Exercise the utmost caution when performing tests
when the machine is running.
/
in the PWM field to choose the element that you wish to test:
• 2 = Thread cutter magnet
PWM
2
67