Dürkopp Adler 650-10 Service Instructions Manual page 80

Service settings via software (OP3000)
2. Unpack the .zip-file on a Dürkopp Adler USB key (part number
9835 301003).
 The update file has the ending .dacimg.
3. Insert the USB key (2) in the USB port (3) at the control (1).
4. Switch on the machine.
 The update starts. The LEDs (4) light up.
 The update is finished when only the POWER LED glows.
Important
5. Calibrate the electronic thread tension ( p. 65).
 The machine is ready to sew.
78 Service Instructions 650-10 - 01.0 - 08/2016