Dürkopp Adler 650-10 Service Instructions Manual page 100

Service settings via software (OP7000)
Fig. 81: Update machine software (2)
3. Switch off the machine and wait and wait for approx. 15 seconds.
4. Connect the Dürkopp Adler USB key to the OP7000.
5. Restart the machine.
 The OP700 detects the USB key and updates the software.
Fig. 82: Update machine software (3)
 The update will take approx. 2 minutes.
Important
Do not switch off the machine during the update!
 Remove the USB key when prompted to do so.
98 Service Instructions 650-10 - 01.0 - 08/2016