Replacing And Setting The Top Conveyor Belts; Replacing The Top Conveyor Belts - Dürkopp Adler 650-10 Service Instructions Manual

3.16 Replacing and setting the top conveyor belts

3.16.1 Replacing the top conveyor belts

Cover
• Remove the rear arm cover ( p. 16)
Fig. 26: Dismount the top conveyor belts
(1) - Screw
(2) - Sewing feet
(3) - Middle foot
Dismount the top conveyor belts
1. Remove the needle from the needle bar
2. Loosen the screw (1).
3. Remove the middle foot (3).
4. Push the right sewing foot upwards.
5. Remove the left conveyor belt from the sewing foot.
6. Remove the left conveyor belt from the gear wheel (6) and from the
7. Push the left sewing foot upwards and the right sewing foot downwards.
8. Remove the right conveyor belt from the sewing foot.
9. Remove the right conveyor belt from the gear wheel (6) and from the
36
( Operating Instructions, Changing the needle).
guide (5).
guide (5).
Individual settings
(4) - Conveyor belts
(5) - Guide
(6) - Gear wheels
Service Instructions 650-10 - 01.0 - 08/2016