Menu Item Reset Operations; Reset All - Dürkopp Adler 650-10 Service Instructions Manual

Service settings via software (OP7000)

5.8 Menu item Reset Operations

The menu item Reset Operations allows you to reset sewing
programs and parameters to the delivery state. To do this, re-entering
the code is requested (for reasons of security).
To select the menu item:
1. Select Reset Operations in the service menu.
 The input mask for the code appears on the display.
2. Enter the code 25483 using the keypad.
 Reset Operations has the following submenus:
Fig. 79: Menu item Reset Operations
Parameters in the menu item Reset
Entry

Reset All

Reset Sewing Programs
5.8.1 Reset All
In the submenu Reset All, you can reset all sewing programs and pa-
rameters to the delivery state.
Only the calibration values for the thread tension and sewing feet are
retained.
Service Instructions 650-10 - 01.0 - 08/2016
Meaning
Resetting to factory defaults
Reset sewing programs
95