Direct Commands Of The System Module - Eaton EDR-5000 Nstallation, Operation And Maintenance Manual

Direct Commands of the System Module

Parameter Description
Ack RO LED Comm Reset the Relay Outputs, LEDs, Communication, and the
TCmd Trip Command.
Ack LED All acknowledgeable LEDs will be acknowledged.
Ack RO All acknowledgeable Relay Outputs will be
acknowledged.
Ack Comm Communication will be acknowledged.
Reboot Rebooting the device.
MaintMode Arc Flash Reduction Maintenance Switch Mode: Manual
Manually Activation of the Arc Flash Reduction Mode
Only available if: Maint Mode = Activation Manually
Program Mode Short-period bypass of the Program Mode.
Bypass
CAUTION: Manually rebooting the device will release the Supervision
Contact.
EDR-5000
Setting range
Inactive,
Active
Inactive,
Active
Inactive,
Active
Inactive,
Active
No,
Yes
Maint Mode inacti-
ve,
Activation via
Comm,
Activation via DI,
Inactive,
Active
Inactive,
Active
www.eaton.com
IM02602007E
Default Menu path
Inactive [Operation
/Reset]
Inactive [Operation
/Reset]
Inactive [Operation
/Reset]
Inactive [Operation
/Reset]
No [Service
/General]
Inactive [Service
/MaintMode
Manually]
Inactive [System Para
/General Settings]
248