Eaton EDR-5000 Nstallation, Operation And Maintenance Manual page 336

Parameter Description
Scale Factor 24 The scale factor is used to convert the measured value in
an integer format
Dead Band 24 If a change of measured value is greater than the
deadband value it will be reported to the master.
Analog value 25 Analog value can be used to report values to the master
(DNP)
Scale Factor 25 The scale factor is used to convert the measured value in
an integer format
Dead Band 25 If a change of measured value is greater than the
deadband value it will be reported to the master.
Analog value 26 Analog value can be used to report values to the master
(DNP)
EDR-5000
Setting range
0.001,
0.01,
0.1,
1,
10,
100,
1000,
10000,
100000,
1000000
0.01 - 100.00%
1..n, TrendRecList
0.001,
0.01,
0.1,
1,
10,
100,
1000,
10000,
100000,
1000000
0.01 - 100.00%
1..n, TrendRecList
www.eaton.com
IM02602007E
Default Menu path
1 [Device Para
/DNP
/Point map
/Analog Input]
1% [Device Para
/DNP
/Point map
/Analog Input]
-.- [Device Para
/DNP
/Point map
/Analog Input]
1 [Device Para
/DNP
/Point map
/Analog Input]
1% [Device Para
/DNP
/Point map
/Analog Input]
-.- [Device Para
/DNP
/Point map
/Analog Input]
336