Eaton EDR-5000 Nstallation, Operation And Maintenance Manual page 776

Device Planning Parameters of the Low-Voltage-Ride-Through
Parameter Description
Mode Mode
Setting Group Parameters of the Low-Voltage-Ride-Through
Parameter Description
Function Permanent activation or deactivation of module/element. Inactive,
ExBlo Fc Activate (allow) or inactivate (disallow) blocking of the
module/element. This parameter is only effective if a
signal is assigned to the corresponding global protection
parameter. If the signal becomes true, those
modules/elements are blocked that are parameterized
"ExBlo Fc=active".
Blo TripCmd Permanent blocking of the Trip Command of the
module/element.
ExBlo TripCmd Fc Activate (allow) or inactivate (disallow) blocking of the
module/element. This parameter is only effective if a
signal is assigned to the corresponding global protection
parameter. If the signal becomes true, those
modules/elements are blocked that are parameterized
"ExBlo TripCmd Fc=active".
Measuring Mode Measuring/Supervision Mode: Determines if the phase-
to-phase or phase-to-earth voltages are to be
supervisioned
EDR-5000
Options
Do not use,
Use
Setting range
Active
Inactive,
Active
Inactive,
Active
Inactive,
Active
Phase to Ground,
Phase to Phase
www.eaton.com
Default Menu path
Do not use [Device Planning]
Default Menu path
Inactive [Protection Para
/<1..4>
/LVRT [1]
/General Settings]
Inactive [Protection Para
/<1..4>
/LVRT [1]
/General Settings]
Inactive [Protection Para
/<1..4>
/LVRT [1]
/General Settings]
Inactive [Protection Para
/<1..4>
/LVRT [1]
/General Settings]
Phase to Ground [Protection Para
/<1..4>
/LVRT [1]
/General Settings]
IM02602007E
776