Optical Ethernet Module With Lc Connector; Urtd-Interface; Boot Phase - Eaton EDR-5000 Nstallation, Operation And Maintenance Manual

Optical Ethernet module with LC connector*

Connector:
Compatible Fiber:
Wavelength:
Minimum Optical Input Power:
Minimum Optical Output Power:

URTD-Interface*

Connector:
Compatible Fiber:
Wavelength:
Minimum Optical Input Power:
*availability depends on device

Boot Phase

After switching on the power supply, the protection will be available in approximately 16 seconds. After approximately
97 seconds, the boot phase is completed (HMI and Communication initialized).
EDR-5000
LC-Port
50/125 µm and 62,5/125 µm
1300 nm
-30,0 dBm
-22.5 dBm with 50/125 µm Fiber
-19,0 dBm with 62,5/125 µm Fiber
Versatile Link
1 mm
660 nm
-39,0 dBm
www.eaton.com
IM02602007E
910