Eaton EDR-5000 Nstallation, Operation And Maintenance Manual page 503

Device Planning Parameters of the 51X/67X Ground Fault Protection
Parameter Description
Mode Mode
Global Protection Parameters of the 51X/67X Ground Fault Protection
Parameter Description
ExBlo1 External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
ExBlo2 External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
ExBlo TripCmd External blocking of the Trip Command of the module/the
element, if blocking is activated (allowed) within a
parameter set and if the state of the assigned signal is
true.
Rvs Blo Reverse Blocking, if Reverse Blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
AdaptSet 1 Assignment Adaptive Parameter 1
EDR-5000
Options
51X[1]: Non-directional,
Forward,
Reverse
51X[2]: Do not use,
Non-directional,
Forward,
Reverse
Setting range
1..n, Assignment
List
1..n, Assignment
List
1..n, Assignment
List
1..n, Assignment
List
AdaptSet
www.eaton.com
Default Menu path
Non-directional [Device Planning]
Default Menu path
-.- [Protection Para
/Global Prot Para
/I-Prot
/51X[1]]
-.- [Protection Para
/Global Prot Para
/I-Prot
/51X[1]]
-.- [Protection Para
/Global Prot Para
/I-Prot
/51X[1]]
-.- [Protection Para
/Global Prot Para
/I-Prot
/51X[1]]
-.- [Protection Para
/Global Prot Para
/I-Prot
/51X[1]]
IM02602007E
503