Eaton EDR-5000 Nstallation, Operation And Maintenance Manual page 29

EDR-5000 IM02602007E
Grounding
The housing must be carefully grounded. Connect a ground cable (AWG
2
12-10 [4 to 6 mm ] / 15 In-lb [1.7 Nm]) to the housing, using the screw that is
marked with the ground symbol (at the rear side of the device).
The power supply card needs a separate ground connection (AWG 14
2
[2.5 mm ] / 5-7 In-lb [0.56-0.79 Nm]) at terminal X1.
The devices are very sensitive to electrostatic discharges.
www.eaton.com 29