Eaton EDR-5000 Nstallation, Operation And Maintenance Manual page 729

Set Parameters of the Power Factor Module
Parameter Description
Function Permanent activation or deactivation of module/element. Inactive,
ExBlo Fc Activate (allow) or inactivate (disallow) blocking of the
module/element. This parameter is only effective if a
signal is assigned to the corresponding global protection
parameter. If the signal becomes true, those
modules/elements are blocked that are parameterized
"ExBlo Fc=active".
Blo TripCmd Permanent blocking of the Trip Command of the
module/element.
ExBlo TripCmd Fc Activate (allow) or inactivate (disallow) blocking of the
module/element. This parameter is only effective if a
signal is assigned to the corresponding global protection
parameter. If the signal becomes true, those
modules/elements are blocked that are parameterized
"ExBlo TripCmd Fc=active".
Trig Mode Trigger Mode. Should the Module be triggered if the
Current Phasor is leading to the Voltage Phasor = Lead?
Or should the Module be triggered if the Current Phasor
is lagging to the Voltage Phasor = Lag?
Trigger-PF This is the power factor where the relay will pick up
Res Mode Trigger Mode. Should the Module be triggered if the
Current Phasor is leading to the Voltage Phasor = Lead?
Or should the Module be triggered if the Current Phasor
is lagging to the Voltage Phasor = Lag?
EDR-5000
Setting range
Active
Inactive,
Active
Inactive,
Active
Inactive,
Active
I leads V,
I lags V
0.5 - 0.99
I leads V,
I lags V
www.eaton.com
IM02602007E
Default Menu path
Inactive [Protection Para
/<1..4>
/Power Factor-Prot
/PF-55D[1]]
Inactive [Protection Para
/<1..4>
/Power Factor-Prot
/PF-55D[1]]
Inactive [Protection Para
/<1..4>
/Power Factor-Prot
/PF-55D[1]]
Inactive [Protection Para
/<1..4>
/Power Factor-Prot
/PF-55D[1]]
I lags V [Protection Para
/<1..4>
/Power Factor-Prot
/PF-55D[1]]
0.7 [Protection Para
/<1..4>
/Power Factor-Prot
/PF-55D[1]]
I lags V [Protection Para
/<1..4>
/Power Factor-Prot
/PF-55D[1]]
729