Eaton EDR-5000 Nstallation, Operation And Maintenance Manual page 329

Parameter Description
Scale Factor 10 The scale factor is used to convert the measured value in
an integer format
Dead Band 10 If a change of measured value is greater than the
deadband value it will be reported to the master.
Analog value 11 Analog value can be used to report values to the master
(DNP)
Scale Factor 11 The scale factor is used to convert the measured value in
an integer format
Dead Band 11 If a change of measured value is greater than the
deadband value it will be reported to the master.
Analog value 12 Analog value can be used to report values to the master
(DNP)
EDR-5000
Setting range
0.001,
0.01,
0.1,
1,
10,
100,
1000,
10000,
100000,
1000000
0.01 - 100.00%
1..n, TrendRecList
0.001,
0.01,
0.1,
1,
10,
100,
1000,
10000,
100000,
1000000
0.01 - 100.00%
1..n, TrendRecList
www.eaton.com
IM02602007E
Default Menu path
1 [Device Para
/DNP
/Point map
/Analog Input]
1% [Device Para
/DNP
/Point map
/Analog Input]
-.- [Device Para
/DNP
/Point map
/Analog Input]
1 [Device Para
/DNP
/Point map
/Analog Input]
1% [Device Para
/DNP
/Point map
/Analog Input]
-.- [Device Para
/DNP
/Point map
/Analog Input]
329