Eaton EDR-5000 Nstallation, Operation And Maintenance Manual page 285

Parameter Description
Latched 29 Defines whether the Input is latched.
Only available if: Latched = Active
Config Bin Inp 30 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
Latched 30 Defines whether the Input is latched.
Only available if: Latched = Active
Config Bin Inp 31 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
Latched 31 Defines whether the Input is latched.
Only available if: Latched = Active
Config Bin Inp 32 Virtual Digital Input. This corresponds to a virtual binary
output of the protective device.
Latched 32 Defines whether the Input is latched.
Only available if: Latched = Active
Slave ID Device address (Slave ID) within the bus system. Each
device address has to be unique within a bus system.
EDR-5000
Setting range
Inactive,
Active
1..n, Assignment
List
Inactive,
Active
1..n, Assignment
List
Inactive,
Active
1..n, Assignment
List
Inactive,
Active
2 - 125
www.eaton.com
IM02602007E
Default Menu path
Inactive [Device Para
/Profibus
/Config Bin Inp 17-
32]
-.- [Device Para
/Profibus
/Config Bin Inp 17-
32]
Inactive [Device Para
/Profibus
/Config Bin Inp 17-
32]
-.- [Device Para
/Profibus
/Config Bin Inp 17-
32]
Inactive [Device Para
/Profibus
/Config Bin Inp 17-
32]
-.- [Device Para
/Profibus
/Config Bin Inp 17-
32]
Inactive [Device Para
/Profibus
/Config Bin Inp 17-
32]
2 [Device Para
/Profibus
/Bus parameters]
285