Manual Resets; Reset To Factory Defaults - Eaton EDR-5000 Nstallation, Operation And Maintenance Manual

Distribution

Hide thumbs Also See for EDR-5000:

Table of Contents

Manual Resets

In the »Operation/Reset« menu, the User can:

Reset counters;

Delete records (e.g.: waveform records); and

Reset special things (like statistics, thermal replica, etc.).

This Function is available at the HMI only.

Press the »Ack/Rst-key« during a cold start, in order to access the »Reset« menu.

Select »Reset to factory default«.

Confirm »Reset device to factory defaults and reboot« with »Yes« in order to execute the reset to factory

The description of the reset commands can be found within the

corresponding modules.

This Function will reset the device to the factory defaults.

All records will be deleted and and the measured values and counters will

be reset. The operation hours counter will be kept.

www.eaton.com

Show Quick Links

Table of Contents