Eaton EDR-5000 Nstallation, Operation And Maintenance Manual page 328

Parameter Description
Scale Factor 8 The scale factor is used to convert the measured value in
an integer format
Dead Band 8 If a change of measured value is greater than the
deadband value it will be reported to the master.
Analog value 9 Analog value can be used to report values to the master
(DNP)
Scale Factor 9 The scale factor is used to convert the measured value in
an integer format
Dead Band 9 If a change of measured value is greater than the
deadband value it will be reported to the master.
Analog value 10 Analog value can be used to report values to the master
(DNP)
EDR-5000
Setting range
0.001,
0.01,
0.1,
1,
10,
100,
1000,
10000,
100000,
1000000
0.01 - 100.00%
1..n, TrendRecList
0.001,
0.01,
0.1,
1,
10,
100,
1000,
10000,
100000,
1000000
0.01 - 100.00%
1..n, TrendRecList
www.eaton.com
IM02602007E
Default Menu path
1 [Device Para
/DNP
/Point map
/Analog Input]
1% [Device Para
/DNP
/Point map
/Analog Input]
-.- [Device Para
/DNP
/Point map
/Analog Input]
1 [Device Para
/DNP
/Point map
/Analog Input]
1% [Device Para
/DNP
/Point map
/Analog Input]
-.- [Device Para
/DNP
/Point map
/Analog Input]
328