Assignment List - Eaton EDR-5000 Nstallation, Operation And Maintenance Manual

Assignment List

The » « below summarizes all module outputs (signals) and inputs (e.g.: states of the assignments).
ASSIGNMENT LIST
Name
-.-
Prot.Available
Prot.Active
Prot.ExBlo
Prot.Pickup Phase A
Prot.Pickup Phase B
Prot.Pickup Phase C
Prot.Pickup IX or IR
Prot.Pickup
Prot.Trip Phase A
Prot.Trip Phase B
Prot.Trip Phase C
Prot.Trip IX or IR
Prot.Trip
Prot.Res FaultNo a GridFaultNo Signal: Resetting of fault number and grid fault number.
Prot.I dir fwd
Prot.I dir rev
Prot.I dir n poss
Prot.IR dir fwd
Prot.IR dir rev
Prot.IR dir n poss
Prot.IX dir fwd
Prot.IX dir rev
Prot.IX dir n poss
Prot.ExBlo1-I
Prot.ExBlo2-I
Ctrl.Local
Ctrl.Remote
Ctrl.SG Indeterm
Ctrl.SG Disturb
Bkr.SI SingleContactInd
Bkr.Pos not CLOSE
Bkr.Pos CLOSE
Description
No assignment
Signal: Protection is available.
Signal: Active
Signal: External Blocking
Signal: General Pickup Phase A
Signal: General Pickup Phase B
Signal: General Pickup Phase C
Signal: General Pickup - Ground Fault
Signal: General Pickup
Signal: General Trip Phase A
Signal: General Trip Phase B
Signal: General Trip Phase C
Signal: General Trip Ground Fault
Signal: General Trip
Signal: Phase current failure forward direction
Signal: Phase current failure reverse direction
Signal: Phase fault - missing reference voltage
Signal: IR Ground fault (calculated) forward
Signal: IR Ground fault (calculated) reverse direction
Signal: IR Ground fault (calculated) direction detection not possible
Signal: IX Ground fault (measured) forward
Signal: IX Ground fault (measured) reverse direction
Signal: IX Ground fault (measured) direction detection not possible
Module Input State: External Blocking1
Module Input State: External Blocking2
Switching Authority: Local
Switching Authority: Remote
Minimum one Switchgear is moving (Position cannot be determined).
Minimum one Switchgear is disturbed.
Signal: The Position of the Switchgear is detected by one auxiliary contact (pole) only. Thus indeterminate
and disturbed Positions cannot be detected.
Signal: Pos not CLOSE
Signal: Breaker is in CLOSE-Position
www.eaton.com
EDR-5000 IM02602007E
967