http://arttel.ru
DID Features
Dial Trunk
DID Destination
BLACKLIST CONFIGURATIONS
In the UCM6100, Blacklist is supported for all inbound routes. Users could enable the Blacklist feature,
manage the Blacklist by clicking on "Blacklist".
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
matches the DID pattern, the call will be allowed to go through.
Extension
x
Voicemail
x
Conference Room
x
Queue
x
Ringgroup
x
Page
x
Vmgroup
x
Fax
x
DISA
x
IVR
x
If enabled, external users calling into the UCM6100 can dial outbound
calls via the UCM6100 trunks by DID. The default setting is "No".
Select the DID destination. Only the selected category can be reached
by DID using this inbound route.
User Extension. This is always selected by default.
x
Conference
x
Call Queue
x
Ring Group
x
Page/Intercom Group
x
IVR
x
Voicemail Groups
x
Fax Extension
x
UCM6100 Series IP PBX User Manual
Page 79 of 159