Startup Mode - Omron CS1G/H-CPUxx-EV1 Programming Manual

Operating Modes
1-4-3

Startup Mode

Refer to the Operation Manual for details on the Startup Mode setting for the
CPU Unit.
Note With CJ1, CS1-H, CJ1-H, CJ1M, or CS1D CPU Units, the CPU Unit will start
in RUN Mode if a Programming Console is not connected. This differs from
the default operation for a CS1 CPU Unit, which will start in PROGRAM Mode
by default if a Programming Console is not connected.
Conditions
PLC Setup is set to start according to
the mode set on the Programming Con-
sole, but a Programming Console is not
connected.
Power turned ON.
PLC Setup set
Programming
Programming
CJ1, CS1-H, CJ1-H, or CJ1M
CPU Unit: CPU Unit starts in
RUN mode.
CS1 CPU Unit: CPU Unit
starts in PROGRAM mode.
CS1 CPU Unit
PROGRAM mode
No
for mode on
Console?
Yes
Yes
Console
connected?
No
Section 1-4
CJ1, CS1-H, CJ1-H,
CJ1M, or CS1D
CPU Unit
RUN mode
The CPU Unit will start in
the mode set in the PLC
Setup.
The CPU Unit will start in
the mode set on the
Programming Console.
11