Omron CS1G/H-CPUxx-EV1 Programming Manual page 112

Sequence Output Instructions
Instruction Symbol/Operand
Mnemonic
Code
SINGLE BIT
RSTB(533)
RESET (CS1-H,
CJ1-H, CJ1M, or
CS1D only)
RSTB
@RSTB
*1
!RSTB
D: Word address
*1
!@RSTB
N: Bit number
SINGLE BIT
OUTPUT (CS1-H, OUTB(534)
CJ1-H, CJ1M, or
CS1D only)
OUTB
@OUTB
*1
!OUTB
D: Word address
N: Bit number
76
RSTB(533) turns OFF the specified bit in the specified word when the
execution condition is ON.
Unlike the RSET instruction, RSTB(533) can be used to reset a bit in a
D
DM or EM word.
N
OUTB(534) outputs the result (execution condition) of the logical pro-
cessing to the specified bit.
Unlike the OUT instruction, OUTB(534) can be used to control a bit in a
D
DM or EM word.
N
Function
Section 3-2
Location
Execution
condition
Output
Required
Output
Required