Startup Mode - Omron SYSMAC CS/CJ Series Programming Manual

Operating Modes
1-4-3

Startup Mode

Refer to the Operation Manual for details on the Startup Mode setting for the
CPU Unit.
Note With CJ1, CS1-H, CJ1-H, or CJ1M CPU Units, the CPU Unit will start in RUN
Mode if a Programming Console is not connected. This differs from the default
operation for a CS1 CPU Unit, which will start in PROGRAM Mode by default
if a Programming Console is not connected.
Conditions
PLC Setup is set to start according to
the mode set on the Programming Con-
sole, but a Programming Console is not
connected.
Power turned ON.
CJ1, CS1-H, CJ1-H, or CJ1M
CPU Unit: CPU Unit starts in
RUN mode.
CS1 CPU Unit: CPU Unit
starts in PROGRAM mode.
PROGRAM mode
PLC Setup set
No
for mode on
Programming
Console?
Yes
Programming
Yes
Console
connected?
No
Section 1-4
CS1 CPU Unit CJ1, CS1-H, or
CJ1-H CPU Unit
RUN mode
The CPU Unit will start in
the mode set in the PLC
Setup.
The CPU Unit will start in
the mode set on the
Programming Console.
11