Omron CS1G/H-CPUxx-EV1 Programming Manual page 246

File Memory
Program Files(.OBJ)
Parameter Area Files
(.STD)
210
and edited with a spreadsheet program (Not supported by CS-series CS1
CPU Units that are pre-EV1).
I/O memory data stored in TXT
or CSV format
Via Memory Card Adapter
or
Memory Card
Conversely, data such as Special I/O Unit settings can be created with a
spreadsheet program in TXT or CSV format, stored on a Memory Card, and
read to the CPU Unit by FREAD(700) (Not supported by CS-series CS1 CPU
Units that are pre-EV1).
In this application, programs that control different processes are stored on
individual Memory Cards. The entire PLC configuration (program, PLC Setup,
etc.) can be changed by inserting a different Memory Card and using the
automatic transfer at startup function.
A.OBJ
The entire program can be replaced during operation from the program itself
(without a Programming Device) using an Auxiliary Area control bit (Not sup-
ported by CS-series CS1 CPU Units that are pre-EV1).
In this application, the PLC Setup, routing tables, I/O table, and other data for
particular devices or machines are stored in Memory Cards. The data can be
transferred to another device or machine just by switching the Memory Card.
Use A.STD.
B.BJO
During operation
.OBJ
Replace program.
Section 5-1
Spreadsheet program
C.OBJ