Omron CS1G/H-CPUxx-EV1 Programming Manual page 14

Functions Supported by Unit Version 3.0 or Later
CS1-H CPU Units (CS1@-CPU@@H)
Function blocks (supported for CX-Programmer Ver. 5.0 or higher)
Serial Gateway (converting FINS commands to CompoWay/F com-
mands at the built-in serial port)
Comment memory (in internal flash memory)
Expanded simple backup data
New Applica- TXDU(256), RXDU(255) (support no-protocol
communications with Serial Communications
tion Instructions
Units with unit version 1.2 or later)
Model conversion instructions: XFERC(565),
DISTC(566), COLLC(567), MOVBC(568),
BCNTC(621)
Special function block instructions: GETID(286)
Additional TXD(235) and RXD(236) instructions (support no-
instruction func- protocol communications with Serial Communica-
tions tions Boards with unit version 1.2 or later)
CS1D CPU Units
CJ1-H/CJ1M CPU Units (CJ1@-CPU@@H, CJ1G-CPU@@P, CJ1M-CPU@@)
Function blocks (supported for CX-Programmer Ver. 5.0 or higher)
Serial Gateway (converting FINS commands to CompoWay/F com-
mands at the built-in serial port)
Comment memory (in internal flash memory)
Expanded simple backup data
New Applica- TXDU(256), RXDU(255) (support no-protocol
communications with Serial Communications
tion Instructions
Units with unit version 1.2 or later)
Model conversion instructions: XFERC(565),
DISTC(566), COLLC(567), MOVBC(568),
BCNTC(621)
Special function block instructions: GETID(286)
Additional PRV(881) and PRV2(883) instructions: Added
instruction func- high-frequency calculation methods for calculat-
tions ing pulse frequency. (CJ1M CPU Units only)
xiv
Function
Unit version 3.0 is not supported.
Function
Unit version
Pre-Ver. 2.0, Ver. 2.0
--- OK
--- OK
--- OK
--- OK
--- OK
--- OK
--- OK
--- OK
Unit version
Pre-Ver. 2.0, Ver. 2.0
--- OK
--- OK
--- OK
--- OK
--- OK
--- OK
--- OK
--- OK
Ver. 3.0
Ver. 3.0