Omron CS1G/H-CPUxx-EV1 Programming Manual page 235

File Memory
Type 1
Name
Program REPLACE
File
Note:
CS/CJ-
series CPU
Unit Ver. 2.0
or later only.
Parameter Not required. ---
Area File
Data File REPLACE
Note:
CS/CJ-
series CPU
Unit Ver. 2.0
or later only.
REPLCDM
Note:
CS/CJ-
series CPU
Unit Ver. 2.0
or later only.
REPLCE@
Note:
CS/CJ-
series CPU
Unit Ver. 2.0
or later only.
Note
Transferring without a Parameter Area File
Extension Description
.OBJ Entire user program
---
.IOM I/O memory data
(Contains the specified
number of words of data
beginning at D20000.)
.IOM
I/O memory data
(Contains the specified
number of words of data
beginning at D00000.)
EM Area data (bank @)
.IOM
(Contains the specified
number of words of data
beginning at
E@_00000.)
1. Make sure the names of the files to be transferred automatically at startup
are AUTOEXEC or ATEXEC@@.
2. The ATEXECDM.IOM and ATEXECE@.IOM files: Not supported by CS-
series CS1 CPU Units that are pre-EV1.
3. One example of the CPU Bus Unit settings would be the Data Link Tables.
Refer to the operation manuals for specific Units for other setup data.
Explanation
• The contents is the same as that of
AUTOEXEC.OBJ.
• This file will be transferred at startup
even if there is not a parameter area
file (AUTOEXEC.STD).
The parameter area file will not be trans-
ferred regardless of the file name.
•
The contents is the same as that of
AUTOEXEC.IOM.
•
This file will be transferred at startup if
the Memory Card also contains a pro-
gram file called REPLACE.OBJ.
•
The contents is the same as that of
ATEXECDM.IOM.
•
This file will be transferred at startup if
the Memory Card also contains a pro-
gram file called REPLACE.OBJ.
• The contents is the same as that of
ATEXECE@.IOM.
• This file will be transferred at startup if
the Memory Card also contains a pro-
gram file called REPLACE.OBJ.
Section 5-1
File
Required
---
---
---
---
199