Omron CS1G/H-CPUxx-EV1 Programming Manual page 407

PLC Comparison Charts
Item
Data Move- MOVE
ment
DOUBLE MOVE
Instruction
MOVE NOT
DOUBLE MOVE
DATA EXCHANGE
DOUBLE DATA
EXCHANGE
MOVE QUICK
BLOCK TRANS-
FER
BLOCK SET
MOVE BIT
MULTIPLE BIT
TRANSFER
MOVE DIGIT
SINGLE WORD
DISTRIBUTE
DATA COLLECT
EM BLOCK
TRANSFER
BETWEEN BANKS
EM BLOCK
TRANSFER
EM BANK TRANS-
FER
MOVE TO REGIS-
TER
MOVE TIMER/
COUNTER PV TO
REGISTER
Mne- CJ Series
monic
MOV Yes Yes
MOVL Yes Yes
MVN Yes Yes
MVNL Yes Yes
XCHG Yes Yes
XCGL Yes Yes
MOVQ No No
XFER Yes (Number Yes (Number
of words to be of words to be
transferred transferred
specified in specified in
binary: 0 to binary: 0 to
65535.) 65535.)
BSET Yes Yes
MOVB Yes (Source bit Yes (Source bit
position and position and
destination bit destination bit
position speci- position speci-
fied in binary.) fied in binary.)
XFRB Yes Yes
MOVD Yes Yes
DIST Yes (Stack oper- Yes (Stack oper-
ation function is ation function is
possible with possible with
another instruc- another instruc-
tion. Offset value tion. Offset value
specified in specified in
binary: 0 to binary: 0 to
65535.) 65535.)
COLL Yes (Stack oper- Yes (Stack oper-
ation function is ation function is
possible with possible with
another instruc- another instruc-
tion. Offset value tion. Offset value
specified in specified in
binary: 0 to binary: 0 to
65535.) 65535.)
BXFR No (Functionally No (Functionally
possible for up possible for up
to 65,535 words to 65,535 words
by directly by directly
addressing EM addressing EM
area using area using
XFER) XFER)
XFR2 No No
BXF2 No No
MOVR Yes (No address Yes (No address
is specified for is specified for
indirect DM/EM.) indirect DM/EM.)
MOVR Yes Yes
W
CS Series C200HX/HG/HE
Yes
No
Yes
No
Yes
No
No
Yes (Number
of words to be
transferred
specified in
BCD: 0 to 6144.)
Yes
Yes (Source bit
position and
destination bit
position speci-
fied in BCD.)
Yes
Yes
Yes (Stack oper-
ation function is
possible. Offset
value specified
in BCD: 0 to
8999.)
Yes (Stack oper-
ation function is
possible. Offset
value specified
in BCD: 0 to
7999.)
No
Yes
Yes
No
No
Appendix A
CVM1/CV CQM1H
Series
Yes Yes
Yes No
Yes Yes
Yes No
Yes Yes
Yes No
Yes No
Yes (Number Yes (Number
of words to be of words to be
transferred transferred
specified in specified in
BCD: 0 to 9999.) BCD: 0 to 9999.)
Yes Yes
Yes (Source bit Yes (Source bit
position and position and
destination bit destination bit
position speci- position speci-
fied in BCD.) fied in BCD.)
Yes (*1) Yes
Yes Yes
Yes (Stack oper- Yes (Stack oper-
ation function is ation function is
possible with possible. Offset
another instruc- value specified
tion. Offset value in BCD: 0 to
specified in 8999.)
BCD: 0 to 9999.)
Yes (Stack oper- Yes (Stack oper-
ation function is ation function is
possible with possible. Offset
another instruc- value specified
tion. Offset value in BCD: 0 to
specified in 7999.)
BCD: 0 to 9999.)
Yes (*1) No
No No
No No
Yes (Address is No
specified for
indirect EM/DM.)
No (Possible for No
Completion
Flags only using
MOVR)
371