Operating Mode Setting At Startup; Operating Mode Changes - Omron NE1A-SCPU01 - 2006 Operation Manual

NE1A-series Controller Operating Modes
8-1-4

Operating Mode Setting at Startup

Operating mode
on startup
Normal Mode
Automatic
Execution Mode
IMPORTANT When the power supply is interrupted in IDLE Mode, the NE1A-series Control-
8-1-5

Operating Mode Changes

CONFIGURING
The user can select the NE1A-series Controller's operating mode from the fol-
lowing two modes at startup, after the normal completion of configuration.
The NE1A-series Controller starts in IDLE Mode after configuration has been
completed. To switch to RUN Mode, use the Network Configurator to change the
mode at every startup.
When this mode is selected and the following operations are performed, the
NE1A-series Controller starts up in RUN Mode thereafter.
• Configuration lock
• Power supply interruptions after switching to RUN Mode.
ler will not start in RUN Mode at the next startup even though Automatic Exe-
cution Mode is set and the configuration is locked. Make sure to turn OFF the
power supply in RUN Mode.
NE1A-series Controller operating modes can be changed using the Network
Configurator.
A password may be required to change the operating mode.
• IDLE Mode RUN Mode
• RUN Mode IDLE Mode
Configuring
Download completed normally.
Description
Configuring
Mode change
IDLE
Mode change
Section 8-1
RUN
185