Hologic ThinPrep Operator's Manual page 96

4
O
PERATION OF THE
Unlock
• For ThinPrep Review Scopes that use the Pilot marking pen, push the pen into the guide.
Loosen your hold on the pen and notice that it moves up slightly. Gently hold the pen there
and press the locking arm to the right until it firmly grips the pen. Because the pen is thinner
than the holder, it may be helpful to hold the pen at a 15° angle (approximately the 1 o'clock
position on a clock face) in the guide, while pressing the locking arm.
Unlock
Press the Done soft key when the pen is loaded. A test mark will be made on the slide.
4.10 Review Scope Operator's Manual
S
OFTWARE
Lock
Figure 4-5 Load the Sharpie
Lock
Figure 4-6 Load the Pilot Object Marker Pen
Creating Mark
Please Wait...
M
ENU
Poor
Good
®
Object Marker Pen
Poor
Center Mark
Press Next
12
9
3
6
Good