Section D: Moving The Review Scope - Hologic ThinPrep Operator's Manual

2
I
NSTALLATION
CAUTION: Route connections carefully to avoid pinching the cables. To avoid tripping
over, or disconnecting cabling, do not place cabling near foot traffic.
The Review Scope is sensitive to vibrations. It should be placed on a flat, sturdy surface away from
any vibrating equipment.
Figure 2-1 A Typical Review Scope
SECTION
D
MOVING THE REVIEW SCOPE
The Review Scope is a precision instrument and should be handled with care. If the microscope must
be moved, it should be grasped and lifted by the frame housing. (Refer to Figure 2-2.) Lifting the
instrument by the motorized stage will cause damage to the microscope and may render it inopera-
ble.
If the Review Scope is to be shipped to a new location, please contact Hologic Technical Support.
(Refer to Service Information, Chapter 8.)
CAUTION: Do not lift or handle the Review Scope by the stage.
Do not rest the stage against your body, as this may misalign the stage.
2.2 Review Scope Operator's Manual