Preferences
6 Beep Volume
The volume of the audible beep may be increased or decreased. From the preferences menu, select 6,
Beep Volume. Press the cancel key
Prev Button
The Beep Volume display shows a highlighted bar with the current volume setting. Press the Next
button on the pod to increase the volume. Press the Prev button on the pod to decrease the volume.
Press the Test soft key to create a test beep. Two beeps will be heard in close succession. The first beep
is at the old setting. The second beep is at the new setting.
Press the Save soft key to save the volume setting.
Note:
Refer to the preferences worksheet at the end of this chapter, when evaluating and recording
preference settings.
O
PERATION OF THE
⊗
at any time to exit out of menus.
Beep Volume
<=
<=
Test
S
OFTWARE
Next Button
50
=>
Save
Review Scope Operator's Manual
4
M
ENU
=>
4.23