Section A: General - Hologic ThinPrep Operator's Manual

C h a p t e r T w o
Installation
WARNING: Service Installation Only
SECTION
A
GENERAL
®
The ThinPrep Review Scope must be installed by Hologic Service Personnel. When installation is
complete, Hologic personnel trains the operator(s), using the Operator's Manual as the training
guide.
SECTION
B
ACTION UPON DELIVERY
Remove and read the Operating Instructions Prior to Installation sheet attached to the packing carton.
Inspect the packing cartons for damage. Report any damage immediately to the shipper and/or
Hologic Technical Support as soon as possible. (Refer to Service Information, Chapter 8.)
Leave the instrument in the packing cartons for Hologic Service installation.
Store the instrument in a suitable environment until installation (cool, dry, vibration-free area).
SECTION
C
PREPARATION PRIOR TO INSTALLATION
Pre-Installation Site Assessment
A pre-installation site assessment is performed by Hologic Service Personnel. Be sure to have pre-
pared any and all site configuration requirements as instructed by the Service personnel.
Location And Configuration
Review Scopes connected to the Server may be local or up to 200 meters (656 feet) away. Room for the
console and Navigator Pod that accompany each review scope should be accommodated, as well as a
comfortable amount of desk space for placing slide cassettes, flats or other slide containers. (Refer to
Figure 2-1.)
I
NSTALLATION
Review Scope Operator's Manual
2
2.1