Hologic ThinPrep Operator's Manual page 81

3
O R S
PERATION OF THE EVIEW COPE
MANUAL REVIEW (continued)
Align 1st
Align 2nd
Align the cell spot 'edge' with the mark indicator.
View 1st Alignment View 2nd Alignment
Figure 3-4 Align Cell Spot
Press the Next button on the pod when satisfied with the second alignment.
Manual Scan/Review of the Cell Spot
Scan Paused
0% Complete
Press Next
To proceed with the scan, press the Next button on the pod. The motorized stage will present the
entire cell spot in a defined path at 10X magnification. The Next button on the pod must be pressed
to advance the stage movement. The console display shows the progress of the cell spot scan in 1%
increments.
3.20 Review Scope Operator's Manual