Hologic ThinPrep Operator's Manual page 135

Table 6.2: User-Correctable System Errors
7153
7154
7155
7156
7161
7166
7167
7190
7191
7192
7193
7194
7195
7196
7197
Readying Pen
Moving Stage
Capping Pen
Joystick Move
Disable X Motor
Disable Y Motor
Moving Stage
Readying Pen
Marking Slide
Capping Pen
Moving Stage
Reset X Location
Moving Stage
T
ROUBLESHOOTING
Check for pen obstruction.
Power cycle the Review Scope to see if the error clears.
Perform marker calibration (menu option 3).
Check for physical interference of nosepiece.
Check for proper seating of objectives.
Lower the stage with the coarse focus knob.
Power cycle the RS.
Check for pen obstruction.
Power cycle the Review Scope to see if the error clears.
Perform marker calibration (menu option 3).
Recalibrate Joystick (menu option 2).
If Recalibration doesn't fix the problem, try new Pod and
Recalibrate Joystick.
a. Turn RS power off
b. Unplug the Pod.
c. Plug in a new Pod.
d. Turn RS power on.
e. Recalibrate the Joystick.
Power Cycle the RS.
If the problem is not resolved, contact Technical Support.
Check for physical interference of nosepiece.
Check for proper seating of objectives.
Lower the stage with the coarse focus knob.
Power cycle the RS.
Check for pen obstruction.
Power cycle the Review Scope to see if the error clears.
Perform marker calibration (menu option 3).
Check for physical interference of nosepiece.
Check for proper seating of objectives.
Lower the stage with the coarse focus knob.
Power cycle the RS.
Check for interferences and remove any obstructions.
Power cycle the RS.
Check for physical interference of nosepiece.
Check for proper seating of objectives.
Lower the stage with the coarse focus knob.
Power cycle the RS.
Review Scope Operator's Manual
6
6.7