Hologic ThinPrep Operator's Manual page 44

SECTION
INTERNAL QUALITY CONTROL
E
Power On Self Test
When the Review Scope is powered on (refer to Power On the Review Scope page 2.7), the instru-
ment goes through a self-diagnostic test. Electrical, mechanical and software systems are tested to
confirm each functions properly. Network communication is tested at the time the user Logs In for an
Auto Review session. The operator is alerted to any malfunction via a message on the console dis-
play.
If the system does not function, or there are persistent errors, contact Hologic Technical Support.
(Refer to Service Information, Chapter 8.)
SECTION
REVIEW SCOPE HAZARDS
F
The Review Scope is intended to be operated in the manner specified in this manual. Be sure to
review and understand the information listed below in order to avoid harm to operators and/or
damage to the instrument.
If this equipment is used in a manner not specified by the manufacturer, then the protection provided
by the equipment may be impaired.
Warnings, Cautions and Notes
The terms WARNING, CAUTION and Note have specific meanings in this manual.
• A WARNING advises against certain actions or situations that could result in personal
injury or death.
A CAUTION advises against actions or situations that could damage equipment, produce
•
inaccurate data or invalidate a procedure, although personal injury is unlikely.
Note
• A provides useful information within the context of the instructions being provided.
I
NTRODUCTION
Review Scope Operator's Manual
1
1.13