Hologic ThinPrep Operator's Manual page 46

Symbol Title
Caution, hot surface
Caution, risk of
electric shock
Protective earth;
protective ground
The Review Scope has symbols placed on it specifically to advise the operator to refer to the Opera-
tor's Manual. (Refer to Figure 1-10.) Be sure to review and understand the warnings listed below in
order to avoid damage to the instrument and any harm to operators. One or more of the warnings
may be pertinent to the area marked.
The instrument model/rating label and the serial number label are also located on the Review Scope.
Description
To indicate that the marked
item can be hot and should not
be touched without taking care
To identify equipment that has
risk of electric shock
To identify any terminal which
is intended for connection to an
external conductor for
protection against electric
shock in case of a fault, or the
terminal of a protective earth
(ground) electrode
Figure 1-9 Symbols used on the instrument
I
NTRODUCTION
Standard information
IEC 60417 Graphical symbols
for use on equipment, symbol
5041
IEC 60417 Graphical symbols
for use on equipment, symbol
5042
IEC 60417 Graphical symbols
for use on equipment, symbol
5019
Review Scope Operator's Manual
1
1.15