Section G: Storage And Handling - Post Installation - Hologic ThinPrep Operator's Manual

2
I
NSTALLATION
Condenser
(Aperture)
Adjustment
Thumbscrews
Condenser
(Aperture) Focus
Knob
Lamp On/Off
Lamp Intensity
Adjustment
SECTION
G
STORAGE AND HANDLING - POST INSTALLATION
The Review Scope may be stored in the location where it was installed. When it is not in use, the
power should be turned off. Cover the instrument with the microscope dust cover.
2.10 Review Scope Operator's Manual
White & Green Mark Indicator
Intensity Adjustments
Figure 2-12 Illumination Control Panel
Focus Knob (on
left & right sides,
both)
Fine Focus
Coarse Focus